| Japanese Here English Here - The DVD drive does ERROR. | - DMA of HDD on a primary side is rewritten in PIO. However, ERROR can be mended. | - When you use HDD with two device 0 and device 1 - WindowsUpDate is unlimitedly done. HDD on one device side went out, and the setting of DMA was rewritten in PIO, and the symptom that slowed unexpectedly went out though it managed to use HDD on 0 device sides by two HDD tying. This thing was described clearly in WEB as the PIO disease. Then, it turned out that the following methods were also effective this time though the method to return by rewriting ServicePack (writing return) had been used up to now as measures. It is a thing that returned normally. It returned normally by adding *A groping the registry in case of figure. - Because 0x00008010/UltraDMA100 is 0x00010010 in 0x00002010/UltraDMA66 in UltraDMA33, whether this numerical value is a normal value or an unexpected value cannot be judged though B shows DWORD of MasterDeviceTimingMode. It explains sequentially then why. First of all, - State at PIO SlaveDeviceTimingMode of device 0 shows DWORD0x00000010(16), and SlaveDeviceTimingModeAllowed shows DWORD0x0000001f(31). MasterDeviceTimingMode of device 1 shows DWORD0x00000010(16), and MasterDeviceTimingModeAllowed shows DWORD0x0000001f(31). - Note _ (31) is a thing of showing ERROR. - DWORD of MasterDeviceTimingModeAllowed of device 1 is changed referring to device 0. MasterDeviceTimingModeAllowed hail2u.net MasterDeviceTimingMode SWEET WATER Web Server WinFAQ/[win2k] device It sees, it refers, is made a grope of the registry, UserMasterDeviceTimingModeAllowed/Dword0xffffffff is shown first, MasterDeviceTimingMode of device 1 shows DWORD0x00000410(1040) in 0002 of the devices 1 when adding it to new ⇒ key ⇒DWORD value, and MasterDeviceTimingModeAllowed shows DWORD0xffffffff(4294967295). This is normal. The forwarding mode of device 1 of the property of device manager \IDE channel doesn't change thoroughly after it reactivates, and PIO is shown. Forward of HDD bad, and the badness are being forwarded to this conduct oneself. MPEG2 etc. of about 5.5 million bps only cannot be reproduced in the without order, and be done about Caccac. Even MPEG2, DivX of normal media, and the Avi reproduction of 1.5 million bps have some Caccac feelings though it is possible to reproduce beautifully by using DVDPlayer. It doesn't become something useful as for recording. Then, it reconciled when adding it to the DWORD key of EnableUDMA66 referring to WinFAQ by (1), and it came to be able to reproduce MPEG2 beautifully there was no amazement easily. However, the forwarding mode of device 1 of the property of device manager \IDE channel doesn't change even if it reactivates, and PIO is shown. It considers it there. The idea method is a thing to add the DWORD key figure below EnablePIO/EnableUDMA33/EnableUDMA66 with OFF(0). - If SlaveDeviceTimingModeAllowed of device 0 changes to DWORD0xffffffff, SlaveDeviceTimingMode of device 0 indicates a normal value of DWORD0x00010010 by the automatic operation (this ..this numerical value.. PC) ..device 1- HDD it... - The forwarding mode of device 1 of the property of device manager \IDE channel was revokable in the EnablePIO(0) specification from PIO to the ultraDMA mode. As for ERROR only of the forwarding rate of HDD, it can enjoy HDD recording/reproduction that was able to correct, and satisfies it very much by this again again. - In this, it is a coincidence to fall into the state to which it confuses it by chance to the end with this computer, and to have recovered it. Primary IDE channel is a channel that usually ties HDD, and the secondary IDE channel is a channel that usually ties DVD/CD-ROM. The same symptom is sure to recover if this chaos doesn't make a mistake and be executed. - Addition-naturallyCD-ROM of device 0 of a secondary IDE channel is DMA mode. - This personal computer is 2.4GHz the frequency of CPU equipped with the mother board for the HTT technology, and is operating attention …* with DDR-SDRAM_1GB. It is not a used machine. !An urgent report was added. Please see the following. Page TOP ↑ Thank you thank you for the people who see miscellany, and open the correction homepage to the public. (Thank you by the contents of a letter. ) Thanks and thanks __ m(_v_) m 。。。。- . 。。。- . 。。。- 彡 | - Property of device manager \IDE channel |
- Microcomputer pewter \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Class\ 4D36E96A-E325-11CE-BFC1-08002BE10318 \(0001or0002)< Windows2000Sp4 >![]() | ||
| - !Urgent report __ DOSBIOS doesn't start. "OS doesn't stand up, and either the display doesn't do power supply ON" is generated again and again. - This personal computer buys the business use machine of the WindowsNT use in the Middle Ages, and is operating it with Windows2000Professional. Over and over..take..recently..start..generate..the..morale..garbage..block..floppy disk drive..relation..start..turn out..measures..start..device..order..replace..surpass.(Come to only have to have it in "In a word, electrical discharge" of open ..either of the SDRAMor floppy disk drive.. if it does only at the time of whiling. ) - (expansion/image click) However, DOSBIOS did not start again under such a condition, and the state in the state of sleeping was generated in the personal computer. Is Gen'yo a start device?It is DVD/CD-ROM drive that set it to @. Drinking CD-ROM, and the drive only of the function (It has already been thought that it breaks down) nothing but ties and is used for this personal computer for device 1 making DVD+-RW (first term of - measures without Barmpluf) drive device 0 cannot correspond to middle term of beginning to appear by Windows2000Professional of the I・O data sale (manufacturing former Hitachi Electronics) to jump at first DVD-RAM. And this CD-ROM began to generate ERROR that did not start DOSBIOS in a similar floppy disk drive again. And the I・O data is put on the market (manufacturing former Hitachi Electronics). It is ..it is.. unprofessional though DVD-RAM cannot correspond by Windows2000Professional, DVD-RAM drive (for windows95/98SE) drive < > only of the function (It has already been thought that it breaks down) ..drinking CD-ROM.. is nothing but removed, and the registry after it reactivates was displayed in the right in which abnormality is found. It doesn't understand and examine the explanation by the WindowsFAQ-Windows recipe, please. !There are measures that do UP in the emergency only as for this method of - to which/that opens removed/is discharged. There is only doing HDD with OS in "Format" if it is useless in this. However, you may try reinstalling only OS. . However, groping the registry : this method. Danger. It becomes more dangerous work, and HDD is formatted, and all DETA is deleted by ..becoming it.. Sama if making a mistake by one step valuable. I think that it connects after knowledge is recognized to Mitsuru (10) with the great result. - - - Management/device manager/IDE of computer of personal computer here When property/detailed setting of a secondary IDE channel of ATA/ATAPI controller _ is seen, it is PIO mode. Automatic detection is not set to DMA either. Because the registry has not been groped yet, it becomes it in this manner. - (right picture) - - - ERROR that cannot be reactivated when secondary IDE channel 0 is experimentally made invalidity (DVD+-RW). DOSBIOS did not start though the connector of HDD of primary IDE channel 0 was removed, and it tried and the electrical discharge of open was seen. When the connector of DVD+-RW of invalidated secondary IDE channel 0 was removed, and the electrical discharge of open was done, it started normally. Abnormality doesn't go out when the sense of reactivation is momentary when normally starting. It fails in the start of DOSBIOS if the sense is opened in half a day always. Apparently ERROR proliferates, and, the correction is not effective. I think it is the same even if HDD is set to the first start device. It is "Do not understand if it doesn't do" theory however, and the thing that becomes it .."Well".. very though try and seen. 。。。。。。"Keep it. " Page TOP ↑ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (expansion/image click) - - - The second Tuesday and turning over WindowsUPDATE was immediately begun because it is update of a malicious deletion tool of Windows yesterday. ..Windows2000 update program KB913580... - Right picture ⇒ Well, UPDATE completion. There was no stress when the power supply of the personal computer was dropped, about 1 hour and 30 minutes in was put, and it started and it started safely. Abnormality was not found though DVD+-RW of the first start device invalidly remained. Mi is continued in the appearance as it is. ![]() - Detailed Page TOP ↑ - - - - - - - - - - - - - - - - - - - - - - - - - - ![]() - - - DOSBIOS doesn't start. The power supply is dropped, waited for, DOSBIOS doesn't start for four hours and 30 minutes, and it doesn't react. The power supply connector is pulled out, and the plug of the being tied speaker is pulled out during the start the first there device invalid. The power supply outlet is pulled out from the personal computer. The DOSBIOS start and the Windows2000ProfessionalOS start screen go out when the power supply is turned on soon. It normally completes it login. However,A large problem is generation ><><><><><><><><><><><><><><><> @?! h?# S%?ヾhara' i?) SHARATSL+?, |?. ^.■。。 V(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)V(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)><><><><><><><><><><><><><><><><><><><><><><><><><><><。。 Because the speaker had begun to play the click sound of an infinite link as soon as having opened my document folder, it did. >>>>>>>>>>>>>>>>>>> comeback movement. It logs in, and it usually operates normally. What is ・・・・・ none that opens my document folder, and when you open lower layer folder next. 。A large problem is generation ><><><><><><><><><><><><><><><> @?! h?# S%?ヾhara' i?) SHARATSL+?, |?. ^.■。。 V(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)V(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)><><><><><><><><><><><><><><><><><><><><><><><><><><><。。Because the speaker had begun to play the click sound of an infinite link as soon as having opened folder, it did. >>>>>>>>>>>>>>>>>>> comeback movement. It normally logs in, and it usually operates usually. What is ・・・・・ none that opens my document folder, and when you open lower layer folder next. 。A large problem is generation ><><><><><><><><><><><><><><><> @?! h?# S%?ヾhara' i?) SHARATSL+?, |?. ^.■。。V(⌒∂⌒)VV(⌒∂⌒)V V(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)V(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)><><><><><><><><><><><><><><><><><><><><><><><><><><><。。 Because the speaker had begun to play the click sound of an infinite link as soon as having opened folder, it did. >>>>>>>>>>>>>>>>>>> shutdown. The power supply is dropped. - (expansion/image click) ![]() Page TOP ↑ -- When the encounter with ♪ unknown is seen again, "Unpleasantness-movie is truth-♪. " --. V(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)V - The personal computer seems to be safe still. Because uninstallation and Desctoppderibar also put it because the software that seems to be needless it is deleted, and it began to use the InstantBuzz.comTOOL bar, this is uninstalled. When the InstantBuzz.comTOOL bar is An'istorled, it reactivates by the automatic operation. It goes out when tab (GUI) goes out at the beginning of login after it reactivates and An'istorl succeeded (Though there is software reconfirmed in login a lot after it reactivates). 。。。}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}{{<}}{{>}}。。。。V(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)VV(⌒∂⌒)V(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)(><)><><><><><><><><><><><><><><><><><><><><><><><><><><><。。 Because the speaker had begun to play a strange sound of an infinite link, it did. The sound ringing doesn't care, and uninstall software related to other GUI. The cookie (It is detected by the spy retrieval) is included and everything is deleted because it was made it like that to no deletion of one spy wear. It reactivates, and the success. As for operation, normality and "Returning advanced < >" are also normal. Even if folder opens in each hierarchy, it is normal. - It went out well before. When graphic software is deleted, it is similar to ERRO that returns normally. 。。。。。。。。。。。。。。 It might be http://www.hotfix.jp/archives/alert/2005/ms05-051.html this. - 4Comeback of passage of time movement. Operation excellence. Well, is it an application that deleted by deleting and adding the application at the end (uninstallation) without "??gateway" and the remembrance though understood that it is ERROR of GUI?. Though it is strange (It is what had been anxious beforehand), isolates from Intranet now (Be progressing now), and the confirmation work is done「Neither management/system tool/event viewer _* application of the computer nor * system are displayed. Nothing is displayed, and, in a word, it is made to Stealth. Another was tried. Start/program/accessories/system tool _* system information is opened. Environment _* service of system information/software is opened. It accesses the floppy disk drive by severe power as hitting repeatedly though the retrieval starts. (It is clearness and abnormal operation. )Then, management/system tool/event viewer _* application of the computer is displayed. However, when * system is opened and * application is opened again, nothing where it disappears is displayed. It is made to Stealth. It shuts once, and it disappears though it became so that it is displayed that management/system tool/event viewer _* application of the computer is opened again when the system is still opened. 」 ERROR ↑↑ and so has gone out. MS05-051 http://www.hotfix.jp/archives/alert/2005/ms05-051.html WinFAQ _ Windows recipe http://winfaq.jp/w2k/device.html Page TOP ↑ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - It is a frieze with the power supply on the display cut when the state of the tie is kept the Internet like continuance and a power supply, etc. on. Reactivation >> safely can have been done by both of logged in selections of "Here reactivated with the reset button" and reactivating in the state because it had fallen no operation with the mouse and the keyboard. When "Display of management/system tool/event viewer _* application of the computer and * system" was opened not to do empty, and to see LOG (To confirm it), LOG came to be displayed without abnormality. In the record, even both "0:40-10:19" is no records. It is recorded, a power supply of the day before on is "17:34", and even the following "0:40" is "0:39 at 0 o'clock of 22 o'clock of 20 o'clock", is recorded by * system, and is recorded, * application is "0:28". Because the power supply on the display at the time cut because it went to bed to "About four o'clock", the interval until reactivating is "It is for about six hours. " later though there is no record, and the Internet was done after that. The display can be OFF>>ONed when it is short time, and other abnormalities are not seen. Virus/worm is not detected as for the retrieval of Secuuritisoft either. 。 - - It nothing but does, and the access of cannot the access to a part of server but a part of server is "Cut to the gem" thing in "Only trouble". - - It has stopped for about one hour and reactivation and ERROR go out. DOSBIOS cannot start. ↓ The figure below is "Display of management/system tool/event viewer _* system of the computer", and ERROR has gone out on a part of server/site that cannot be accessed. - When Ethernet is cut, warning of E100B is one that goes out and "Balloon. " of "Icon of the local area connection". ![]() - - - The SDRAM memory is removed, work of discharging electricity open is done, and it reactivates. It is thought that some viruses/worm is detected, and is ゙SymantecTM. ERROR went out while searching when the virus of Symantec Security Check was detected with WEB of ゙. Fall HDD doesn't react to the power supply of the monitor, and, then, when the power supply is not dropped and reactivation was tried with the reset switch, ゙SymantecTM again because it was possible to reactivate by pushing the switch several times. When it accesses WEB of ゙, and the beginning click of the security check on the other was done, it has freezed it with such a picture. This conduct oneself grows serious, and the SDRAM memory was not able to be worn, to be removed several times, and to be started even if it repeats. It managed to remove "It lowered to the third start device, and the removal device (floppy disk drive) was set to the first start device" DVD+-RW drive of the Symantec TM_Symantec Security Check http://www.symantec.com/region/jp/securitycheck/ - LOG "Display of management/system tool/event viewer _* application of the computer and * system" is confirmed, and whether any records remain nothing is recorded the other day. Even LOG seems not to remain in this ERROR. It is ERROR that holding/freezing monitor shuts down momentarily. Then as if when "The lamp of HDD ..keeping push of the reset switch.. and an invalid DVD+- drive only blinks" comeback movement can be done , saying that "Push without turning off power after it kept pushing the reset switch for several seconds", doing ..Urawaza of the game machine.. descends just like. Page TOP ↑ - - - Symantec TM_Symantec Security Check゙ virus detection When having gone again in ゙, it became the following results.
Page TOP ↑ - - - Important, basic ERROR was found. ERROR (place today) was able to be corrected apart from the reason. - The PIO mode of device 0 was improved by property/detailed setting of a secondary IDE channel, and it returned to the UltreDMA mode. - ERROR not to be able to start DOSBIOS even by reactivation was ameliorable though it did not test for a long time still. ![]() ・* There was a connector of the tie of one though Gen'yo had to have removed I・O data sale DVD-RAM (Hitachi Electronics manufacturing) drive ..all connectors... The sound card attaches to the personal computer, and if the voice output terminal of the DVD-RAM(CD-ROM) drive is not connected to the voice input of the sound card, the sound is not emitted from DVD/CD in an analog reproduction when the sound reproduces. The connector tied mutually, and it is possible to have been listened to the sound reproduction in the analogue naturally. In a word, it remained connecting only this connection. It becomes Gen'yo, the shutdown element to the DVD-RAM drive side of the dependence wireless source (Even if the connector is connected) that seems that serge it is generated in some factors though PCI is "Intel(r) 82371AB/EBPCItoPCIbridgi" for this personal computer, and it seems that it does by invalidating PCIbridgi. Therefore, ERROR come not to go out to the thing that the obstruction element is detached if the analog voice connection code is removed. Because the test put every long time is the future, it becomes appearance Mi. When the DVD-RAM drive is effectively done, operation with the access is generated, and moreover, it cannot be specified, "An active virus in the memory was detected", "The computer was infected with already-known some virus or Trojan horse", and "There might be an infection file of the undetection on this computer" by the security check, and there is no knowledge of subspecies at all though it was thought that this was some factors. It is also in the place where this vicinity especially becomes a nature. Windows 95/98_ WinFAQ _ Windows recipe http://winfaq.jp/ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ![]() - The first DOSBIOS in test is not started, and HDD/DVD drive (2) lamp is blinked, and it is ゙ Chong the reset switch Chouo doing it as for the power on/off switch. It pushes lightly once with ゙. Start and login success. 。。! - Reference >>>> ゙…older versions of the Intel Application Accelerator driver fail otherwise.゙(There seems to be a thing that the older version of the Application Accelerator driver of Intel fails. ) Page TOP ↑ ![]() It starts normally ..time -second.. without trouble. (Cut it from after 12 hours and 30 minutes pass/Intranet. ) - (expansion/image click) ・* It made it because the problem was not brought up to the start after that 2-3 times and either it changed to the virus ..again.. retrieval by installing NotonAntiVirus2006 ..in HDD... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The result of the virus retrieval is displayed by installing NotonAntiVirus2006 in a right picture. The AD wear and the spy wear are detected by the one detected in Temporary Internet Files. However, - The influence of CPU speed goes out of some NotonAntiVirus2006 directly so that operation may slow. It is necessary to note internet game slowness 1.3GHz's operation. - It seems that pure AD wear, and moreover, these are repeated and go into it because the HTML form that uses port 80 if the pop up block is not used. - (expansion/image click) - - It is O ..length.. cervine of the reset switch and ゙ Chong of the power on/off switch ..-.. after this. happen by the display standby the frieze, and do not start by reactivation that switches off and ..power supply.. puts the following rest DOSBIOSIt pushes and ERROR that starts by ゙ revives. It does, and it seems to be going to begin to relapse in the future. Therefore, detection and the deletion of the main body of ERROR can be said, "It is undecided" also with NotonAntiVirus2006. Page TOP ↑ - - - Five hours have passed. DOSBIOS did not start if the electrical discharge of SDRAM memory all CH (Used it by 0-2CH and 3) open was not done. It was useless though the display code and each DVD/floppy disk drive/speaker/USB code/keyboard/mouse/connection tried to tie. ゙ Chong. It pushes and it has returned to the first state of ERROR that ゙ is not effective either. The definition of constant software of ProgramFiles ties it seems ..kind of worm/virus used.. to have the ability to study the environment immediately though the activity stops if the definition is cut though it is a repetition. The problem remains as a problem in the future. The thing that recovers by some methods can be said, "It is suitable as the solution". ![]() ┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳┏┳ ・* BIOS doesn't start after all at all after updating the above-mentioned well, CPU is exchanged, and it operates in such a state. It operates with 3ch, and, now, only HDD and video card/board connects the Internet with SDRAM by the Ethernet connection. If the Internet security is not cut about NotonAntiVirus2006, it has been understood it has the ability to intercept even the Intranet connection for strong Secuwamord. There was one doubt when CPU was exchanged. Is not indescribably gotten now though it has in making of this grease solid in the place where the grease of a part of location in the core is made solid (state that the watercolor hardens) and space ゙ can be done between dependence ゙ core and the radiator, and it has the memory therefore as guide's fellows also were pointing it out with WEB though the temperature of CPU might go up and ERROR go out though grease is painted on CPU core and the radiator is installed. ┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻┗┻ - - - CPU is exchanged, and it moves. The mother board seems to be safe. Let's return by installing sound card/IEEE1394/SCSI card etc. there, and move it a little more. The frieze happens while being scanning the virus with NotonAntiVirus2006 and it reactivates with the reset switch without difficulty. It cuts by the scanning start if LOG is seen (restoration and deletion of the virus scanning) and the record doesn't exist. Something actively accesses the DVD-RAM drive of device 1 in two DVD-ROM drives. (In the intra cutting. )When the pull-down menu of "DMA is possible" is set and the forwarding mode was reactivated, the frieze happens on the start screen of Windows2000 and it reactivates with the reset switch because it is there, and device 1 is PIO mode (The lamp of the DVD-RAM drive is blinking while freezing it). After a few seconds, it freezed it again in the place that had been accessed the DVD-RAM drive by something though the following were able to have reactivated and were able to have logged it in. To removing the DVD-RAM drive there and reactivation. 。。。。。。However, ""Vuu-"" is an allophone from the speaker when BIOS cannot be started and it makes it to the power supply switching off. It makes it to the thing that opening discharges all SDRAM and reactivates (The electrical discharge work is made to put it for 5-10 minutes). "Application accessed DVD-RAM" is displayed in the process of the device manager or it will be seen to have hit on how. - - Anything doesn't happen with the reactivation log in, and such feeling, "Gatitsu" though there was an access in the floppy disk once. When management/device manager/secondary IDE "IDE ATA/ATAPI controller"/channel/detailed setting of the computer is opened, the forwarding mode both the device "0" and "1" includes the UltraDMA mode. There is frequently not an access to the DVD-RAM drive now though 20 minutes passed either. The virus is scanned again there, and ERROR sees whether it can be detection of something whether happen with NotonAntiVirus2006. ![]() - (expansion/image click) - - The scanning NotonAntiVirus-was being executed, and "CcApp.exe" ended. This seems to be a thing used for the Mail check with File of NotonAntiVirus. Why have you ended?Any "Virus spyware and other risks" was not found though the scanning completion was done. - - Moreover it freezes, and, "Ctrl+Alt+Delete" is not effective either. The display changes to the setting that doesn't turn off power. HDD changes to the setting that turns off power in five minutes. Thank you, and the setting of the power management has caused ERROR, and might be the power supply very thing. It reactivates by reset, < F2 > is pushed, and EnteringSETUP and BIOS are displayed, and it is reactivation, and, however, frieze "Failure" of making in PowerManagement "Disabled" while logging it inIt returns to former "Enabled" and it reactivates. It is possible to operate by reset. The frieze, and if the power supply is not dropped from the speaker with the allophone, ""Vuu-"" of the example doesn't cut, and be pattern that becomes the repeated SDRAM memory electrical discharge open while Mail is received. It is a place that becomes "Gatitsu" and a nature though there was an access in the floppy disk a little while ago. Page TOP ↑ - - - The dual boot start is basic, and Windows 98 is installed as base OS. Because the AD wear and the spy wear, etc. had been detected from this conduct oneself a lot, the installation do over again was done again. Then, it has freezed it on "It is frequency of reactivation different from always, and reactivate many times" and a jet-black Cac side though it reactivates while installing it. It installs it when reactivating. Degree ERROR is displayed twice though was continued. " It goes out , saying that "HRESULT:800b0111h". When seeing with DirectXErrorLookup Value(in hex) : 800b0111h Error Message (error message): HRESULT : S_OK Description : The function completed successfully . The option of S ....S of S-OK.. -.. (command line): It is a specific command, and override (superscription) as for the Smart_Mode initialization variable. It is explained. (* The Smart_mode initialization variable is set by "Yes|No", and does operation that does specific execution. ) - In Description (description), The function (function), completed (complete/completion), and successfully. (Successfully. ) : It is explained < function completed translation = successfully >. In a word, " The thing that there is a problem in cabfile of JavaScript has come into view by this though there is no obstacle in use because Windows 98 is base OS until disliking it though it returns to the subject. Windows2000 makes both of HDD display/cutting operation "OFF". (* The Smart_mode initialization variable is set by "Yes|No", and does operation that does specific execution. ) - - - Again, Windows 98 was reinstalled. The ERROR dialog of Javascript came out at that time, and the dialog of another DirectX diagnosis tool came out, too. Let's explain sequentially. The reinstalling work was done ..three continuous times in total it... - When it is normal, the reactivation under the installation is three times. After it reactivates the first ..-.. time of reinstalling and the 1st, the file overlaps or the file ..".. is not found. It was displayed by four rows as " - After it reactivates the second, Windows 98 setup/system ..".. has been updated. In " The Java package cannot be installed from the display of the ERROR dialog of "* Java package manager" and "C\Windows\Java\class\xmldso4.cab. It ..uncertainty HRESULT:(800b0111h) ".. went out. It does for a while. The Java package cannot be installed from the display of the ERROR dialog of "* Java package manager" and "C\WINDWS\SYSTEM\dajava.cab. It went out ..the uncertainty.. ..HRESULT:(800b0111h) "... After that, it is a different ERROR dialog. "* DirectX diagnosis tool" ..".. directions : dxdiag [ x/output file ] [ T/output file ][/whql:on | /whql:off] /x output file - XML information is preserved in < output file > without displaying information on the screen, and it ends. /t output file - Text information is preserved in < output file > without displaying information on the screen, and it ends. /whql:on - Dxdiag is permitted to confirm WHQL digital a signature. /whql:off - Dxdiag is not permitted to confirm WHQL digital a signature. Attention: The WHQL certificate might be renewed by using the Internet connection when the confirmation of WHQL digital a signature is permitted. " - A white cursor is freezed though becomes login because of reactivation and the last third reactivation though is displayed. It reactivates with the reset switch though it waited for as much as ten minutes. A set item comes out, and the login completion. - It updates it with MicrosoftStartup menu again in MicrosoftStartup menu though it is usually operation by normal the last reactivation at this time .."15sec" waiting of Nomal and the Windows 98 log in screen.. .."... "goes out, a white cursor screen waits for 20-60 seconds, and the system .."Windows 98 setup" ".. has been updated while logging it in. The last setting ends by "and it becomes login completion. - and it reinstalled it the second. The same dialog is displayed at the same, and "* DirectX diagnosis tool" doesn't go out, and be this time once like the limit. Reset was pushed by the third reactivating at the frieze and about five minutes and it logged it in in the fourth reactivation. Last time and the first time used same Windows 98 package product CD-ROM, and used the Windows 98 of different packing this time. The following use windows98 of a different again a package product (Windows 98 has waited for why). Page TOP ↑ - The third reinstalling is quite the same as the last times similar second. It became a blue screen as soon as CD-ROM was replaced of but, and it .."Exception OEM is 0028:.. was generated by E71CA640. It is quitting the application now. It put it away in ""Reactivate with Ctrl+Alt+Delete" is not done though it goes out , saying that "Reactivate when which.. pushing" ..no reactivation even if which key is pushed... It is ..< .. beginning of the third reinstalling that finally reactivates by ""BackSpace key"" >It freezes and it logs it in in the fourth reactivation. Extra File is deleted there and scanning desk/defrag and the result that continues have freezed even Windows 98 while idling. As "Expectation", it is "The influence of Windows2000 has gone out still. "Here will be found and the method by which it manages to recover the correction be found. Moreover, Windows2000 frequently sets up the frieze. It is not possible to solve only by opening pulling out about SDRAM, and "Noppiki doing" large problem occurs. - - - - - - Was something important misunderstanding done and it is not possible to know. BackUP was captured, and reinstalling was prepared and deletion File of MyDocumentFiles of Windows2000 put forth completely was seen the deletion (It is ..this conduct oneself.. important). Update UPDATE_File of Microsoft (- Note?@)Because it is the Internet of ..peel.. (passing) Naturally, it targeted in the deletion, and it deleted it. Moreover, it deletes it for the precaution though (direct) short cut to the Internet is preserved. Moreover, it runs in haste to buy external BOX HDD and the heat conduction seat for a nearby electric discount house for BackUP, and the BackUP preparation completion is done. However, there was still a problem in how to spread grease or the frieze happens because of how to paint it. It stops though time is counted when the BIOS screen is displayed to the first stage of the start. →It begins to move when moves and time is displayed again. Exchange..CPU..water imp..Main..radiator..contact..part..small..grease..a lot..painting..pass..thermal conductivity..bad..CPU..rise in heat..go up..phenomenon..occur.This thing is a thing that understands from using the heat conduction seat. Therefore, the problem is not brought up to stop the seat, to prolong grease thinly, and to paint. ..(*.. note?@ : I am voluntarily selected by the shopping cart form with DownLoad of old update file before the dependence selection can be done, it settles in the manager option, and DownLoad is done to self-File in this conduct oneself as floatage MicrosoftWindowsUPDATE. "Iuhist_catalog.xml" catalog of "Xml" extension is appended to self-file in that .."File of WU is formed".., and old update file enters File according to Sonosono and the item. Become familiar with..part..display..same..start..one.) - - - After that. 。。Windows2000Professional keeps moving. (It reinstalls, and * is interrupting. ) - Unique radiator tuning method. The X680x0 power-supply unit is cut. http://x68k.net/x68dengen/ A huge radiator and being possible to come is the strongest. http://www.geocities.co.jp/HeartLand/4821/seion.html Making of power supply Fanres http://www.boreas.dti.ne.jp/~hisao-y/silent-pc/power.html - It refers to the electronic cooling method. Temperature control of Peltier element http://www.sun-inet.or.jp/~yasubou/cooling/p3/pel/01/01.html Peltier element and water-cooled http://web01.fureai.or.jp/~hirobo/cooling/peltier/water_cooling.html - It is an over clock if it is called a DOS/V making by oneself. - It cools Peltier if it is called over clock. http://tarabagani.net/dosv/peruche/ Peltier type air conditioner making for water tank by oneself(V1.0) http://room210.cool.ne.jp/acua/diy/coolerf/pcool.htm CUP COOLER http://www.jade.dti.ne.jp/~toto/tkcity-public_html/komono/cup/cup.html | ||
| | ||
| Page TOP ↑ | ||